3.1.30：PWLINK device reboot

1：Power reset for peripherals

Due to the hardware limitations of PWLINK itself, the output voltage is not isolated, which may cause PWLINK to reset when powering large load peripherals directly.

2：Handling

Plug the PWLINK into a USB port with sufficient drive capability and use the external device's own power supply.

tip

PWLINK2 version: The upgraded version of PWLINK2 is isolated on the power supply and supports 3.3V/ 5V outputs, and can also use an external reference voltage, so there is no reset phenomenon when PWLINK is connected to a large load.