4.1.4.1.3 Quantity and auto
The Quantity and Self-Test page provides offline programming limitations and self-start/stop function settings.
- Limit the number of times to burn: Limit the number of times to program offline, after using it up, you will not be able to continue to program the target chip.
- Hexadecimal display: Switching display mode.
- Automatic Chip Detection: Enable offline programming self detection mode for chips
- Chip-in de-jitter time: When chip connection is detected, delay the set time before operation.
- Chip take away to jitter time: when the chip is detected offline, delay the set time before the subsequent operation.
Self-start and stop function open conditions in addition to the need to open the chip auto-detection, power supply to the device, you still need to manually press the key (machine control CTRL) to start the auto-detection, and when the programming fails, the auto-detection function will be paused in order to check the error, and then manually start to continue to carry out the programming again.
If you turn on chip auto-detection, you cannot turn on programming and then power off, otherwise you cannot trigger the next round of auto-detection.
For details on the operation of the offline programming self-start-stop, please visit Offline automatic start/stop method。