Skip to main content
Version: Next

4.10 Status

4.10.1 Introduce​

The Power Debugger application software interface displays the current connection status of the transceiver device, as shown below:

image-20240919172249233

The current state of the device can be categorized as follows:

  • Disconnected (red text): may occur in all modes, indicating that the device is idle and not paired, when the network is connected.
  • Connecting (yellow text): the network is being connected, applicable in LAN mode and public network mode.
  • Pairing (yellow text): device pairing is in progress for direct connect, LAN and public network modes.
  • Validating (yellow text): device authorization validation is being performed for public network mode.
  • Connected (green): indicates that the device is in the connected state and the device can be used normally in the current state.
  • Connected P2P, (green)：Indicates that the device is in the P2P connected state, and the device can be used normally in the current state.
info

Connected P2P, available only in P2P mode, when P2P mode is not available, standard mode is used for communication.

tip
  • The device status identifies the current operating status of the transceiver device and is the same as the status of the hardware indicator, see: Device Interface.
  • There is some delay in refreshing the device status.